Aerosol Duster

Dusters used compressed propellant that when released, spray out with enough force to dislodge dust and other loose contaminents. When these contaminants get in the way of vents or fans within the device, they create a build-up which leads to overheating and/or shortages. 

None of our dusters contain bitterant. Many consumer dusters include bitterant to prevent "huffing". That bitterant  can be left behind as a residue, so should be avoided when cleaning sensitive or critical devices. 

No, our dusters do not leave a residue. They contain 100% volatile propellent, which means the chemical completely evaporates. If there is moisture left behind after using duster, that is condensation from the ambient air because the spray cooled the surface. Be aware that many consumer dusters include bitterant to prevent "huffing". That bitterant  can be left behind as a residue, so should be avoided when cleaning sensitive or critical devices. None of our dusters contain bitterant. 

If the can and valving is intact and undamaged, it will not leak or spoil, so can sit on a shelf for as long as 10 years.

No, there are a variety of different types of dusters, some more for consumer use, and others more common in commercial applications. Many retail dusters have bitterant added to prevent huffing. When duster is used in the home, there is concern that the material will be purposely inhaled (called “huffing” or “dusting”) by minors, which can sometimes lead to tragic consequences. To avoid this, bitterant is added to make the duster taste bad. This same bitterant can lead to unwanted and potentially harmful residues on sensitive surfaces like electronic circuit boards. There are also different options for the propellant: HFC-134a – Nonflammable, most common for industrial applications when spraying energized circuits because of the risk of a spark lighting a flammable material. It is under close scrutiny because it has a Global Warming Potential (GWP) of 1400, so 1400 times the impact of CO2. HFC-152a – Most commonly available duster in consumer retail because it is less expensive than HFC-134a. It is flammable, and will ignite when concentrated (i.e. in liquid form) and exposed to a spark or flame. HFO-1234ze – This is a newer, nonflammable material introduced in the last 10-years as a very low GWP alternative (<1) to HFC-134a. It is non-flammable and is almost indistinguishable from HFC-134a when sprayed, but unfortunately at a much higher price.

Yes, air duster is generally designed for use on electronics. There are a few things to watch out for: Avoid spraying the refrigerant liquid, which can happen if you shake the can, or angle it too much. The refrigerant is very cold, so can damage some sensitive electronics. Avoid cheap retail dusters that contain bitterant. Many retail dusters have bitterant added to prevent huffing. When duster is used in the home, there is concern that the material will be purposely inhaled (called “huffing” or “dusting”) by minors, which can sometimes lead to tragic consequences. To avoid this, bitterant is added to make the duster taste bad. This same bitterant can lead to unwanted and potentially harmful residues on sensitive surfaces like electronic circuit boards.

That depends on the size of the can and how much you use it. If the can and valving is intact and undamaged, it will not leak or spoil, so can sit on a shelf for many years.

The can of duster must be held in an upright position when spraying. Do not tilt can more than 40 degrees during spraying operation or shake during use. Before use, press actuator to clear valve of any liquid product. Extension tube can be used to remove dust in tight areas. Use short bursts to prevent cooling of can.

Most duster contain refrigerant that is liquid when held under pressure. The goal of duster is to spray the vapor not the liquid, so the valving is designed to capture the vapor from the top of the can. When you shake a can, turn it, or flip it upside-down, you can introduce the liquid refrigerant to the mix. Careful, because that is cold enough to cause frost bite and damage sensitive electronics. Ultraject All-Way (part #ES1620) is designed to spray upside-down without expelling liquid refrigerant.

Most aerosol duster contains a refrigerant/propellant that cannot be considered “air”. As a matter of fact, breathing too much of these vapors can lead to negative health effects. Compressed Air Duster is most commonly filled with the following propellants: HFC-134a, HFC-152a, HFO-1234ze, CO2, and DME. Refer to the TDS (tech data sheet) or SDS (safety data sheet) for more specifics.

It can be if used improperly. Aerosol dusters contain pressurized refrigerant, not breathable air as the common names (e.g. “canned air”, “compressed air”) for it suggests. Take care to use in a ventilated area, avoid contact with any liquid refrigerant that is expelled, keep the can away from high heat and flames, and avoid puncturing the can. Since you are potentially blowing around particles, eye protection is also a good idea. See the SDS (safety data sheet) for more specifics.