Dusters used compressed propellant that when released, spray out with enough force to dislodge dust and other loose contaminents. When these contaminants get in the way of vents or fans within the device, they create a build-up which leads to...

None of our dusters contain bitterant. Many consumer dusters include bitterant to prevent "huffing". That bitterant can be left behind as a residue, so should be avoided when cleaning sensitive or critical devices.

In the process of assembling, reworking or repairing printed circuit boards (PCB) for electronic devices, the discussion inevitably turns to whether or not to clean the PCB. Cleaning adds time and expense to the process, and doing it wrong...

No, our dusters do not leave a residue. They contain 100% volatile propellent, which means the chemical completely evaporates. If there is moisture left behind after using duster, that is condensation from the ambient air because the spray cooled...

Wick, Solder Wick, Desoldering Wick, Solder Braid, Desoldering Braid. All of these names refer to the same thing. It is a method of removing unwanted solder using flux and braided copper wire. It is commonly used to aid in removing faulty...

Qualifying a replacement cleaning chemistry can be a daunting task, as performance parameters are considered along with safety and regulatory issues. Changes in the regulatory environment can force these changes, and unfortunately many substitute...

Need Help With Your Application? Enrique Francis efrancis@itwcce.com 678-928-6534 Hi, I’m Enrique Francis, the sales manager for bulk solvents at Chemtronics. Today I’m going to take you through the different methods of degreasing,...

Need Help With Your Application? Enrique Francis efrancis@itwcce.com 770-424-4888 Hi, I’m Enrique Francis, the sales manager for bulk solvents at Chemtronics. Today I’m going to take you through the different methods of degreasing,...

Solder wick, desoldering braid, or just “wick” are all names for a copper braid that is used to absorb solder. It is generally coated with flux, so when heated, solder is melted, drawn up, and retained using a combination of wetting...