There’s a dirty little secret in the Fiber optics world. Many installers use cleaning methods that when inspected under a scope, show a great deal of contamination left behind. Unless they inspect 100% of their connections, they take...

For those of you considering dip application in your conformal coating process, the following are general guidelines to bear in mind when exploring this application method. There are a number of variations of dip coating of PCBs. The most...

Although water can cause extensive damage to electronics, it does not mean that equipment is lost and cannot be replaced. Electronics, telecommunications equipment, and fiber optic connections are able to be restored after water damage. The...

Chemtronics® manufactures a large variety Flux-Off® brand solder flux residue removers to satisfy many different requirements, for example if the cleaner needs to be nonflammable, safe on sensitive plastics, or have extra cleaning strength....

Ultrasonic cleaning equipment used with a solvent is a popular choice when companies in heavy industry, electronics, medical electronics, and aerospace industries need to aggressively remove stubborn soils. An ultrasonic cleaning process utilizes...

Flux Remover Video User Guide CLEAN WITH OVERALL SPRAY | CLEAN WITH EXTENSION TUBE / STRAW | CLEAN WITH BRUSH ATTACHMENT Flux removers are used to clean flux off printed circuit boards (PCBs), which is left behind after the soldering...

In technical support, we receive calls almost every week asking how to dissolve conductive bonds made with CircuitWorks Conductive Epoxy (part #CW2400). The best advice I can give is to physically remove the cured material by sanding, scrapping...

Electrical contact cleaning can help resolve intermittent issues with your device caused by contamination in the electrical contacts. A contact cleaner (also called electrical cleaner, switch cleaner, electrical contact cleaner, and, specific...

In the process of assembling, reworking, or repairing printed circuit boards (PCBs) for electronic devices, the discussion inevitably turns to whether or not to clean the PCB. Cleaning adds time and expense to the process, and doing it wrong...

There’s a dirty little secret in the fiber optics world. Many installers use cleaning methods that when inspected under a scope, show a great deal of contamination left behind. Unless they inspect 100% of their connections, they...